Table of Contents
Advertisement
5. Using a small, flat-blade screwdriver, carefully slip the
blade under the spring-loaded tab and gently pry up until
the battery pops out of the socket.
Pry up gently on the spring-loaded tab as shown
in the following figure. The battery should pop
completely out of the socket so that you can
remove and discard it properly.
6. Remove the battery and discard it in accordance with the
manufacturer's instructions.
7. With the positive (+) side facing up, slide the new battery
into the socket and press it into place.
6-12 Solving System Problems
! CAUTION
Removing the battery
A – Battery B – Tab
Advertisement
Table of Contents
