Table of Contents
Advertisement
Menu Item
IDE Configuration
IDE Controller
Hard Disk Delay
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
3-14 Configuring the System
Advanced Menu Items
Settings (default is bold) and Description
Disabled, Primary, Secondary, Both
This field enables the primary, secondary, or
both interface connectors on the riser board.
Disabled, 3 seconds, 6 seconds,
9 seconds, 12 seconds, 15 seconds,
21 seconds, 30 seconds
The hard disk pre-delay gives the hard drive time
to spin up before the system boots. Set a hard
disk pre-delay if your hard drive needs more time
to spin up.
Device type, None
Device type, None
Device type, None
Device type, None
Each device menu item displays the Hard drive
or CD-ROM identifier if a device is installed.
If you install a hard drive that does not feature
auto IDE type detection or your IDE hard drive
was formatted on another system with
parameters different from those reported by the
drive, enter a parameter for each of the fields in
the device submenu.
Bring up device submenu by pressing Enter.
Advertisement
Table of Contents
