Table of Contents
Advertisement
Inserting a device
Note:
To easily access device connectors
for cabling, do not insert a 5 1/4-inch device all
the way into the slot.
5. Connect the device cables (see "Connecting Device
Cables" and "Cabling an IDE Device").
6. Insert the device the rest of the way into the device slot,
making sure that the locking tabs on the sides of the drive
engage the brackets on each side of the device slot.
7. Replace the system unit front panel (see "Replacing the
Front Panel").
8. Replace the system unit cover (see "Replacing the
Cover").
9. Run the Setup program to set the new configuration (see
"BIOS Setup Utility" in Chapter 3).
Installing Options 5-43
Advertisement
Table of Contents
