Preparing The Device; Connecting Device Cables - NEC POWERMATE 8100 Manual

Preparing the Device

Before installing a storage device in the system, follow any preinstallation
instructions that come with the device. For example, check the following
information:
Diskette drive — remove any termination on the optional diskette
!
drive. See the documentation that comes with the drive.
IDE drive — check the jumper settings on the device before installing
!
it. See the documentation that comes with the device for jumper
setting information.
CD-ROM drive or DVD-ROM drive must be set correctly as the first
!
(master) or second (slave) device on the IDE channel.
See "Connecting Device Cables" for more information.

Connecting Device Cables

The cables used for installing optional storage devices include the
following:
diskette drive signal cable
!
IDE signal cables
!
internal SCSI device cables
!
PC adapter card cables
!
system power cables.
!
Riser board cable drive connectors are shown in the following figures.
The Wake-On LAN connector on the desktop riser board is not shown. It
is located above the PCI slot and to the right of the Modem In connector.
Installing Options 5-41