Table of Contents
Advertisement
functionality after the Fix OS is performed. To restore the system to its
factory-installed state, perform another OS restore using the Auto or
Custom option.
the Auto or Custom option afterward might cause unpredictable results.
See the next section, "Installing Applications" for instructions on using
the NEC Selective Application Install program. See "NEC Driver CD" to
install other applications and drivers.
Installing Applications
Use the following procedure to install most applications and the NEC
Help Center with the Selective Application Restore program. This
procedure applies to all applications except the NEC SNMP Agent and
the NEC WebTelligent software.
1.
After logging on the first time, reboot the system.
2.
Insert the NEC Select Install CD as follows.
For systems running the Windows NT operating system:
!
After the system reboots and you have chosen the Windows NT
Workstation Version 4.00 operating system, but before Windows
NT actually completes its boot and displays the NT logon screen,
insert the NEC Select Install CD.
Note
Install the optional software located on the NEC Select Install CD
after your first logon to Windows NT.
For systems running the Windows 95 or Windows 98 operating
!
system: After the system reboots, insert the NEC Select Install
CD.
The CD autorun feature generates the NEC Selective Application
Restore Program screen (see the following screen).
3-38 Configuring the System
Some or all applications might not exhibit full
Using the Fix OS option repetitively without using
Advertisement
Table of Contents
