Table of Contents
Advertisement
Removing a DIMM
If your memory configuration requires the removal of a module, perform
the following steps:
handling boards or memory modules, reduce static discharge by touching
the system's metal chassis.
Remove the system unit cover (see "System Unit Cover").
1.
2.
Locate the system memory upgrade sockets on the system board (see
"System Board Options"). Any socket (or all) can contain a DIMM
memory module.
Press the plastic clips at the outer edges of the socket away from the
3.
memory module. This ejects the DIMM from the socket.
Installing a DIMM
Install a memory module by performing the following steps:
Remove the system unit cover (see "System Unit Cover").
1.
Before opening the computer and before
Removing a DIMM
A – Plastic Clip
Installing Options 5-21
Advertisement
Table of Contents
