Table of Contents
Advertisement
LDCM Admin Function
The following information is for System Administrator use in
administrating local area networks. This information applies to systems
that are configured for Windows 95 or Windows 98 or Windows NT.
The LANDesk Client Manager (LDCM) Admin function is installed on
the C drive of your computer when LANDesk Client Manager is installed
from the NEC Select Install CD. For information on installing LANDesk
Client Manager, see "Installing Applications" in Chapter 3.
Once LANDesk Client Manager is installed, start LDCM Admin as
follows.
Power up the system.
1.
Click Start, point to Programs, and click Explorer.
2.
In Explorer, double click (C:) Landesk.
3.
Double click Admin.
4.
Double click Setup.exe and follow the prompts.
5.
Cheyenne Backup
Cheyenne Backup is a data management and backup program, available
on systems running the Windows 95 or Windows 98 operating system.
This program is separate from but integrates into the Intel LANDesk
Client Manager's Smart Hard Drive Auto-Backup Utility and the NEC
Backup Utility. If hard drive performance degrades due to bad sectors or
other internal problems, the Smart Hard Drive utility automatically
invokes the Cheyenne Backup program and backs up the entire file
system to a Zip drive or to a network drive.
Note
Cheyenne Backup does not work in conjunction with an ATAPI
tape drive.
Cheyenne Backup can also do regularly scheduled backups and scan files
for viruses during a backup operation.
Install the Cheyenne Backup utility from the NEC Select Install CD. For
installation information, see "Installing Applications" in Chapter 3.
Managing System Resources 4-9
Advertisement
Table of Contents
