Table of Contents
Advertisement
Restoring the Operating System
Follow these steps to restore the operating system to a state for retrieving
and backing up data without repartitioning or reformatting the hard drive.
Once all data is backed up, perform another OS Restore using the Auto or
Custom options.
delete all the data on your hard drive. If possible, back up your data before
performing an OS Restore with these options.
1.
Power on or restart the system and immediately insert the NEC Select
Install CD into the CD-ROM drive.
For systems with a SCSI hard drive, a bootable diskette is included
with the NEC Select Install CD. In SCSI systems, first boot the
system from the bootable diskette. After the system boots, proceed
with the NEC Select Install procedure described below.
After the system boots from the CD, the Operating System Restore
Welcome screen appears.
3-36 Configuring the System
The Auto and Custom OS Restore programs
Welcome screen
Advertisement
Table of Contents
