Target - SMC Networks BARRICADETM SMCWGBR14-N2 User Manual

T
ARGET
Figure 78: Host Settings
Choose menu "Access Control->Target", you can view and set a Target list
in the screen as shown in the following figure. The target list is necessary
for the Access Control Rule.
Figure 79: Target Settings
Target Description - Here displays the description about the target
◆
and this description is unique.
◆ Information - The target can be IP address, port, or domain name.
Modify - To modify or delete an existing entry.
◆
To add a new entry, please follow the steps below.
Click the Add New button.
1.
In Mode field, select IP Address or Domain Name.
2.
If you select IP Address, the screen shown is Figure 79.
■
1) In Target Description field, create a unique description for the
target (e.g. Target_1).
2) In IP Address field, enter the IP address of the target.
3) Select a common service from Common Service Port drop-down
list, so that the Target Port will be automatically filled. If the
Common Service Port drop-down list doesn't have the service you
want, specify the Target Port manually.
4) In Protocol field, select TCP, UDP, ICMP or ALL.
– 95 –
| Access Control Settings
C 11
HAPTER

Target