SMC Networks BARRICADETM SMCWGBR14-N2 User Manual page 119

Remote Management IP Address - This is the current address you
◆
will use when accessing your Router from the Internet. This function is
disabled when the IP address is set to the default value of 0.0.0.0. To
enable this function change 0.0.0.0 to a valid IP address. If set to
255.255.255.255, then all the hosts can access the Router from
internet.
To access the Router, you should type your Router's WAN IP address
N :
OTE
into your browser's address (in IE) or Location (in Navigator) box, followed
by a colon and the custom port number. For example, if your Router's WAN
address is 202.96.12.8, and the port number used is 8080, please enter
http://202.96.12.8:8080 in your browser. Later, you may be asked for the
Router's password. After successfully entering the username and
password, you will be able to access the Router's web-based utility.
Be sure to change the Router's default password to a very secure
N :
OTE
password.
– 119 –
| System Tools
C 14
HAPTER
Remote Management