SMC Networks BARRICADETM SMCWGBR14-N2 User Manual page 77

Click the Start button to start the Network Sharing service.
Click the Stop button to stop the Network Sharing service.
Click the Eject Disk button to safely remove the USB storage device that is
connected to USB port. This takes the drive offline. A message will appear
on your web browser when it is safe to detach the USB disk.
Click the Rescan button to start a new scan.
Follow the instructions below to set up your Router as a file server:
Plug an external USB hard disk drive or USB flash drive into this Router.
1.
Click the Rescan button to find the USB drive that has been attached to
2.
the Router, and then the screen will appear as the following figure
shown.
Figure 61: Sharing Settings - Rescan
To specify a volume that the Network Sharing users can access, click
3.
the Edit link in the Properties column and configure the share settings.
Set the Network Sharing user's username and password on User
4.
Accounts page.
Click the Start button to start the Network Sharing service.
5.
Now the Network Sharing users inside your local network can access
6.
files on the USB drive from Internet Explorer at its Share Name
followed by the Router's LAN IP address, for example:
\\192.168.2.1\MyShare.
– 77 –
| USB Storage Settings
C 8
HAPTER
Sharing Service