SMC Networks BARRICADETM SMCWGBR14-N2 User Manual page 69

By PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you
can add it to the network by PIN with the following two methods.
Method One: Enter the PIN into my Router
Keep the default WPS Status as Enabled and click the Add device
1.
button in Figure 44, then the following screen will appear.
Figure 53: Add a New Device
Choose Enter the new device's PIN and enter the PIN code of the
2.
wireless adapter in the field behind PIN in the above figure. Then click
Connect.
The PIN code of the adapter is always displayed on the WPS
N :
OTE
configuration screen.
For the configuration of the wireless adapter, please choose Enter a PIN
3.
into my access point or a registrar in the configuration utility of the
WPS as below, and click Next.
– 69 –
| Wireless Settings
C 6
HAPTER
WPS