SMC Networks BARRICADETM SMCWGBR14-N2 User Manual page 60

Figure 40: Add or Modify Wireless MAC Address Filtering Entry
To add or modify a MAC Address Filtering entry, follow these
instructions:
Enter the appropriate MAC Address into the MAC Address field. The
1.
format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any
hexadecimal digit). For example: 00-0A-EB-00-07-8A.
Enter a simple description of the wireless station in the Description
2.
field. For example: Wireless station A.
Status - Select Enabled or Disabled for this entry on the Status pull-
3.
down list.
Click the Save button to save this entry.
4.
To modify or delete an existing entry:
Click the Modify in the entry you want to modify. If you want to delete
1.
the entry, click the Delete.
Modify the information.
2.
Click the Save button.
3.
Click the Enable All button to make all entries enabled
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries
Click the Next button to go to the next page
Click the Previous button to return to the previous page.
For example: If you desire that the wireless station A with MAC address 00-
0A-EB-00-07-8A and the wireless station B with MAC address 00-0A-EB-
00-23-11 are able to access the Router, but all the other wireless stations
cannot access the Router, you can configure the Wireless MAC Address
Filtering list by following these steps:
– 60 –
| Wireless Settings
C 6
HAPTER
Wireless MAC Filtering