SMC Networks BARRICADETM SMCWGBR14-N2 User Manual page 52

Click the Save button to save it.
4.
To modify or delete an existing entry, follow the steps below.
Find the desired entry in the table.
1.
Click Modify or Delete as desired on the Modify column.
2.
To find an existing entry, follow the steps below.
Click the Find button.
1.
Enter the MAC Address or IP Address.
2.
Click the Find button in the page as shown in the following figure.
3.
Figure 32: Find IP & MAC Binding Entry
Click the Enable All button to make all entries enabled.
Click the Delete All button to delete all entries.
– 52 –
| Network Settings
C 5
HAPTER
Binding Setting