SMC Networks BARRICADETM SMCWGBR14-N2 User Manual page 121

How do I configure the Router to access Internet by Ethernet
users?
Login to the Router, click the "Network" menu on the left of your
1.
browser, and click "WAN" submenu. On the WAN page, select "Dynamic
IP" for "WAN Connection Type", finish by clicking "Save".
Some ISPs require that you register the MAC Address of your adapter,
2.
which is connected to your cable/DSL Modem during installation. If
your ISP requires MAC register, login to the Router and click the
"Network" menu link on the left of your browser, and then click "MAC
Clone" submenu link. On the "MAC Clone" page, if your PC's MAC
address is proper MAC address, click the "Clone MAC Address" button
and your PC's MAC address will fill in the "WAN MAC Address" field. Or
else, type the MAC Address into the "WAN MAC Address" field. The
format for the MAC Address is XX-XX-XX-XX-XX-XX. Then click the
"Save" button. It will take effect after rebooting.
Figure 109: MAC Clone
I want to use Netmeeting, what do I need to do?
If you start Netmeeting as a host, you don't need to do anything with
1.
the Router.
If you start as a response, you need to configure Virtual Server or DMZ
2.
Host and make sure the H323 ALG is enabled.
How to configure Virtual Server: Log in to the Router, click the "Special
3.
Application" menu on the left of your browser, and click "Virtual
Servers" submenu. On the "Virtual Servers" page, Click the Add New
button. Then on the "Add or Modify a Virtual Server Entry" page, enter
"1720" for the "Service Port" blank, and your IP address for the "IP
Address" blank, taking 192.168.2.169 for an example, remember to
Enable and Save.
Figure 110: Virtual Servers
– 121 –
| FAQ
A A
PPENDIX