SMC Networks BARRICADETM SMCWGBR14-N2 User Manual page 67

Method Three:
Keep the default WPS Status as Enabled and click the Add device
1.
button in Figure 44, then the following screen will appear.
Figure 50: Add a New Device
Choose Press the button of the new device in two minutes and click
2.
Connect.
For the configuration of the wireless adapter, please choose Push the
3.
button on my access point in the configuration utility of the WPS as
below, and click Next.
Figure 51: The WPS Configuration Screen of Wireless Adapter
– 67 –
| Wireless Settings
C 6
HAPTER
WPS