SMC Networks BARRICADETM SMCWGBR14-N2 User Manual page 81

To setup a virtual server entry:
Click the Add New button.
1.
Select the service you want to use from the Common Service Port list.
2.
If the Common Service Port list does not have the service that you want
to use, type the number of the service port or service port range in the
Service Port box.
Type the IP Address of the computer in the IP Address box.
3.
Select the protocol used for this application, either TCP or UDP, or All.
4.
Select the Enable check box to enable the virtual server.
5.
Click the Save button.
6.
Figure 65: Add or Modify a Virtual Server Entry
If your computer or server has more than one type of available
N :
OTE
service, please select another service, and enter the same IP Address for
that computer or server.
To modify or delete an existing entry:
Click the Modify in the entry you want to modify. If you want to delete
1.
the entry, click the Delete.
Modify the information.
2.
Click the Save button.
3.
Click the Enable/ Disabled All button to make all entries enabled/ disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and click the Previous button
to return the previous page.
– 81 –
| Special Application Settings
C 9
HAPTER
Virtual Servers