Panel Display; Main Menu; Table 3-2 Main Menu; Figure 3-2. Panel Display - SMC Networks 8124PL2 - annexe 1 Management Manual

configured as follows: Under the menu "Tools/Internet Options/General/
Temporary Internet Files/Settings," the setting for item "Check for newer
versions of stored pages" should be "Every visit to the page."
2.
When using Internet Explorer 5.0, you may have to manually refresh the
screen after making configuration changes by pressing the browser's refresh
button.

Panel Display

The web agent displays an image of the switch's ports. The Mode can be set to
display different information for the ports, including Active (i.e., up or down), Duplex
(i.e., half or full duplex, or Flow Control (i.e., with or without flow control). Clicking on
the image of a port opens the Port Configuration page as described on page 3-83.

Main Menu

Using the onboard web agent, you can define system parameters, manage and
control the switch, and all its ports, or monitor network conditions. The following
table briefly describes the selections available from this program.
Menu
System
System Information
Switch Information
Bridge Extension
Configuration
IP Configuration
Jumbo Frames
File Management
Copy Operation
Delete
Set Start-Up

Figure 3-2. Panel Display

Table 3-2 Main Menu

Description
Provides basic system description, including contact
information
Shows the number of ports, hardware/firmware version
numbers, and power status
Shows the bridge extension parameters
Sets the IP address for management access
Enables or disables jumbo frames
Allows the transfer and copying files
Allows deletion of files from the flash memory
Sets the start-up file
Panel Display
Page
3-10
3-10
3-11
3-12
3-14
3-17
3-18
3-18
3-20
3-18
3-3