Spanning Tree Commands; Spanning-Tree; Table 4-53. Spanning Tree Commands - SMC Networks 8124PL2 - annexe 1 Management Manual

Example
Console#show mac-address-table aging-time
Aging time: 300 sec.
Console#

Spanning Tree Commands

This section includes commands that configure the Spanning Tree Algorithm (STA)
globally for the switch, and commands that configure STA for the selected interface.
Command

spanning-tree

spanning-tree mode
spanning-tree forward-time
spanning-tree hello-time
spanning-tree max-age
spanning-tree priority
spanning-tree pathcost method
spanning-tree transmission-limit Configures the transmission limit for RSTP
spanning-tree spanning-disabled Disables spanning tree for an interface
spanning-tree cost
spanning-tree port-priority
spanning-tree edge-port
spanning-tree portfast
spanning-tree link-type
spanning-tree protocol-migration Re-checks the appropriate BPDU format
show spanning-tree
spanning-tree
This command enables the Spanning Tree Algorithm globally for the switch. Use the
no form to disable it.
Syntax
[no] spanning-tree
Default Setting
Spanning tree is enabled.

Table 4-53. Spanning Tree Commands

Function
Enables the spanning tree protocol
Configures STP, or RSTP mode
Configures the spanning tree bridge forward time
Configures the spanning tree bridge hello time
Configures the spanning tree bridge maximum age GC
Configures the spanning tree bridge priority
Configures the path cost method for RSTP
Configures the spanning tree path cost of an
interface
Configures the spanning tree priority of an interface IC
Enables fast forwarding for edge ports
Sets an interface to fast forwarding
Configures the link type for RSTP
Shows spanning tree configuration for the common
spanning tree (i.e., overall bridge), or a selected
interface.
Spanning Tree Commands
Mode
GC
GC
GC
GC
GC
GC
GC
IC
IC
IC
IC
IC
PE
PE
4
Page
4-139
4-140
4-141
4-142
4-142
4-143
4-144
4-144
4-145
4-145
4-146
4-147
4-148
4-148
4-149
4-150
4-139