Changing The Aging Time; Figure 3-67. Displaying The Mac Dynamic Address Table - SMC Networks 8124PL2 - annexe 1 Management Manual

Configuring the Switch
• VLAN – ID of configured VLAN (1-4093).
• Address Table Sort Key – You can sort the information displayed based on MAC
address, VLAN or interface (port or trunk).
• Dynamic Address Counts – The number of addresses dynamically learned.
• Current Dynamic Address Table – Lists all the dynamic addresses.
Web – Click Address Table, Dynamic Addresses. Specify the search type (i.e., mark
the Interface, MAC Address, or VLAN checkbox), select the method of sorting the
displayed addresses, and then click Query.

Figure 3-67. Displaying the MAC Dynamic Address Table

CLI – This example also displays the address table entries for port 1.
Console#show mac-address-table interface ethernet 1/1
Interface Mac Address
--------- ----------------- ---- -----------------
Eth 1/ 1 00-E0-29-94-34-DE
Eth 1/ 1 00-20-9C-23-CD-60
Console#

Changing the Aging Time

You can set the aging time for entries in the dynamic address table.
Command Attributes
• Aging Status – Enables/disables the function.
• Aging Time – The time after which a learned entry is discarded.
(Range: 10-630 seconds; Default: 300 seconds)
3-110
Vlan Type
1 Permanent
2 Learned
4-137