Show Interfaces Counters - SMC Networks 8124PL2 - annexe 1 Management Manual

4
Command Line Interface
Example
Console#show interfaces status ethernet 1/5
Information of Eth 1/5
Basic information:
Port type:
Mac address:
Configuration:
Name:
Port admin:
Speed-duplex:
Capabilities:
Broadcast storm:
Broadcast storm limit:
Flow control:
LACP:
Port security:
Max MAC count:
Port security action:
Media type:
Current status:
Link status:
Port operation status:
Operation speed-duplex: 1000full
Flow control type:
Console#show interfaces status vlan 1
Information of VLAN 1
MAC address:
Console#

show interfaces counters

This command displays interface statistics.
Syntax
show interfaces counters [interface]
interface
• ethernet unit/port
• unit - Stack unit. (Always unit 1)
• port - Port number. (Range: 1-28)
• port-channel channel-id (Range: 1-8)
Default Setting
Shows the counters for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see "Showing Port
Statistics" on page 3-99.
4-118
1000T
00-30-F1-D4-73-A5
Up
Auto
10half, 10full, 100half, 100full, 1000full
Enabled
500 packets/second
Disabled
Disabled
Disabled
0
None
None
Up
Up
None
00-00-AB-CD-00-00