APRILIA RS 50 - 1999 Manual page 68

Carefully read p. 55 (MAINTENANCE).
Position the motorcycle on the stand.
Insert the key (1) in the lock (2).
Rotate the key (1) clockwise.
Raise and remove the saddle (3).
Remove the flap (4).
Upon reassembly:
Position the flap (4) correctly.
Insert the rear tangs (5) of the saddle in
the appropriate seats (see figure).
Lower the saddle and insert the two pins
(6) in the relevant seats.
Turn the key (1) anticlockwise, locking
the saddle.
 
WARNING
Before riding, make sure that the saddle
(3) is properly positioned and locked:
risk of serious injuries or even death.
?
68 use and maintenance RS 50
Carefully read p. 55 (MAINTENANCE).
 
WARNING
Before carrying out the following opera-
tions, let the engine and the exhaust si-
lencer cool down until they reach room
temperature, in order to avoid burns.
Position the motorcycle on the stand.
Unscrew and remove the four screws
(7).
Unscrew and remove the two lower
screws (8).
For the left fairing: unscrew and re-
move the two rear screws (9).
For the right fairing: unscrew and re-
move the rear screw (10).
Unscrew and remove the four screws
(11).
 
CAUTION
Handle the plastic and painted compo-
nents with care and avoid scraping or
damaging them.
Be careful not to damage the electric
cables.
Disconnect the two electric terminals
(12) of the direction indicator.
Remove the side fairing (13).