APRILIA RS 50 - 1999 Manual page 59

-
Loosen the knob (1).
Remove the front fork support (2) from
the stand.
Insert the support pin (3).
Repeat the previous operations on the
opposite side of the stand.
 
WARNING
Lift the motorcycle by grasping the two
sides of the swing arm only.
Insert the stand from the back of the mo-
torcycle and position it so that the two
support pins (3) can be located as fol-
lows:
– the right support between the brake
caliper and brake line coupling on the
swing arm (Pos. A);
– the left support between the sprocket
and chain (Pos. B).
Slide the support pins (3) towards the
motorcycle, so that the bosses on the
pins touch the swing arm (see figure
above).
Tighten the two knobs (1).
NOTE
Have someone help you keep the
motorcycle in vertical position with the two
wheels on the ground.
Rest one foot on the rear part of the
stand (4).
Push the stand (4) downwards until it
reaches the end of its stroke (see figure).
?
use and maintenance RS 50 59