APRILIA RS 125 - 1998 Manual page 74

#(!.').'
4(% 2%!2 ,)'(4 "5,"
Carefully read p. 71 (BULBS).
c
Before changing a bulb, check
the fuses, see p. 68 (CHANGING
THE FUSES) and the effective operation
of the stoplight switches, see p. 70
(CHECKING THE SWITCHES).
74
use and maintenance RS 125
Position the vehicle on the stand.
Unscrew and remove the two screws (1).
Remove the protection screen (2).
c
Upon reassembly, correctly po-
sition the protection screen in its
seat.
Tighten the screw (1) carefully, without
exerting too much pressure, in order to
avoid damaging the protection screen.
Press the bulb (3) slightly and rotate it
anticlockwise.
Extract the bulb from its seat.
c
Insert the bulb in the bulb sock-
et, making the two bulb pins co-
incide with the relevant guides on the
socket.
Correctly install a new bulb of the same
type.
a
Upon reassembly, tighten the
two screws (1) moderately and
carefully, to avoid damaging the
protection screen.