Table of Contents
Advertisement
VBAT (battery voltage)
By pressing the
push button for the
second time, the battery voltage (10), ex-
pressed in volt, is indicated on the dis-
play.
The recharge system functions properly if
at 4000 rpm the battery voltage, with low
beam on, is included between 13 and 15 V.
The current time (11) appears in the lower
part of the display.
18
use and maintenance RS 125
TIME (setting hour/minutes)
By pressing the
push button for the
third time, the hour and minutes (12) are
displayed.
To change the time data, proceed as fol-
lows:
Press the
push button and the
number indicating the hours will start
blinking.
To increase the value, press the
button.
To set the minutes, press the
button and the number indicating the
minutes will start blinking.
To increase the value, press the
button.
Now, to store the setting of the hour and
minutes.
Press the central
push button.
LAP TIME (chronometer)
By pressing the
fourth time, the "LAP TIME" (13) function
is displayed, which makes it possible to
time each lap with the vehicle on the track
and to store the data in order to be able to
consult them successively.
push
push
push
push button for the
Hide quick links:
Advertisement
Table of Contents
