APRILIA RS 125 - 1998 Manual page 72

#(!.').'
4(% (%!$,)'(4 "5,"3
Carefully read p. 71 (BULBS).
Position the vehicle on the stand.
c
Before changing a bulb, check
the fuses, see p. 68 (CHANGING
THE FUSES).
The headlight contains:
One high beam bulb (1) (right side).
One parking light bulb (2) (lower side).
One low beam bulb (3) (left side).
72
use and maintenance RS 125
To change the bulbs, proceed as fol-
lows:
PARKING LIGHT BULB
a
To extract the bulb socket, do
not pull the electric wires.
Working on the rear side of the front part
of the fairing, seize the bulb socket (4),
pull it and remove it from its seat.
Withdraw the parking light bulb (5) and
replace it with one of the same type.
HIGH BEAM BULBS
Working on the rear right side of the front
part of the fairing, move the protection el-
ement (6) with your hands.
Withdraw the electric terminal (7).
Release the check spring (8) positioned
at the rear of the bulb socket (9).
Extract the bulb (10) from its seat.
c
Insert the bulb in the bulb sock-
et, making the relevant position-
ing seats coincide.
Correctly install a new bulb of the same
type.