APRILIA RS 125 - 1998 Manual page 47

0/3)4)/.).' 4(% 6%()#,% /.
4(% 2%!2 3500/24 34!.$ m
Screw and tighten the pin (1)
c
appropriate seat on the rear fork.
Have someone help you keep
the vehicle in vertical position
with the two wheels on the ground.
Make the two housings on the stand (2)
coincide with the two pins (1) provided
on the vehicle.
Rest one foot on the rear part of the
stand (3).
Push the stand (3) downwards until it
reaches the end of its stroke (see figure).
0/3)4)/.).' 4(% 6%()#,% /.
4(% &2/.4 3500/24 34!.$ m
&
in the Position the vehicle on the appropriate
rear support stand
SITIONING THE VEHICLE ON THE
REAR SUPPORT STAND m).
Insert the two ends of the stand (4) in the
two holes (5) positioned on the lower
ends of the front fork.
Rest one foot on the front part of the
stand (6).
Push the stand (6) downwards until it
reaches the end of its stroke (see figure).
&
, see beside (PO-
use and maintenance RS 125 47