Figure 29-7 Menu 27.1.1: Ipsec Setup - ZyXEL Communications ZYWALL 10W User Manual

ZyWALL 10~100 Series Internet Security Gateway
You must also configure menu 27.1.1.1 or menu 27.1.1.2 to fully configure and use
FIELD
Index This is the VPN rule index number you selected in the previous menu.
Name Enter a unique identification name for this VPN rule. The name may be up
to 32 characters long but only 10 characters will be displayed in Menu
27.1 - IPSec Summary.
Active Press [SPACE BAR] to choose either Yes or No. Choose Yes and press
[ENTER] to activate the VPN tunnel. This field determines whether a VPN
rule is applied before a packet leaves the firewall.
29-12
Menu 27.1.1 – IPSec Setup
Index= 1 Name= Taiwan
Active= Yes Keep Alive= No
Local ID type
My IP Addr= 0.0.0.0
Peer ID type
Secure Gateway Addr= zw50test.zyxel.com.tw
Protocol= 0
Local: Addr Type= SINGLE
IP Addr Start= 1.1.1.1
Port Start= 0
Remote: Addr Type= SUBNET
IP Addr Start= 4.4.4.4
Port Start= 0
Enable Replay Detection = No
Key Management= IKE
Edit Key Management Setup= No
Press ENTER to Confirm or ESC to Cancel:

Figure 29-7 Menu 27.1.1: IPSec Setup

Table 29-8 Menu 27.1.1: IPSec Setup
DESCRIPTION
Content:
Content:
a VPN.
End= N/A
End= N/A
End= 255.255.0.0
End= N/A
EXAMPLE
VPN/IPSec Setup
1
Taiwan
Yes