Figure 26-9 Ip Routing Policy - ZyXEL Communications ZYWALL 10W User Manual

Step 5. Create a rule in menu 25.1.1 for this set to route packets from any host (IP=0.0.0.0 means any
host) with protocol TCP and port FTP access through another gateway (192.168.1.100).
Policy Set Name= set2
Active= Yes
Criteria:
IP Protocol
Type of Service= Don't Care
Precedence
Source:
addr start= 0.0.0.0
port start= 0
Destination:
addr start= 0.0.0.0
port start= 20
Action= Matched
Gateway addr
Type of Service= No Change
Precedence
Press Space Bar to Toggle.
Step 6.
Check Menu 25.1 - IP Routing Policy Setup to see if the rule is added correctly.
Step 7. Apply both policy sets in menu 3.2 as shown next.
IP Policy Routing
Menu 25.1.1 - IP Routing Policy
= 6
= Don't Care
=192.168.1.100
= No Change
Press ENTER to Confirm or ESC to Cancel:

Figure 26-9 IP Routing Policy

ZyWALL 10~100 Series Internet Security Gateway
Packet length= 10
Len Comp= N/A
end= N/A
end= N/A
end= N/A
end= 21
Log= No
26-9