Figure 280 Menu 27.1.1 Ipsec Setup; Table 150 Menu 27.1.1 Ipsec Setup - ZyXEL Communications P-662HW-61 User Manual

Figure 280 Menu 27.1.1 IPSec Setup

Active= Yes
Local ID type= IP
My IP Addr= 0.0.0.0
Peer ID type= IP
Secure Gateway Address= zw50test.zyxel.com.tw
Protocol= 0
Local:
Remote:
Enable Replay Detection = No
Key Management= IKE
Edit Key Management Setup= No
The following table describes the fields in this menu.
Table 150
FIELD
Index
Name
Active
Keep Alive
Chapter 45 VPN/IPSec Setup
Menu 27.1.1 – IPSec Setup
Index= 1
Keep Alive= No
DNS Server= 0.0.0.0
Addr Type= SINGLE
IP Addr Start= 1.1.1.1
Port Start= 0
Addr Type= SUBNET
IP Addr Start= 4.4.4.4
Port Start= 0
Press ENTER to Confirm or ESC to Cancel:
Menu 27.1.1 IPSec Setup
DESCRIPTION
This is the VPN rule index number you selected in the previous menu.
Enter a unique identification name for this VPN rule. The name may be up to 32
characters long but only 10 characters will be displayed in Menu 27.1 - IPSec
Summary.
Press [SPACE BAR] to choose either Yes or No. Choose Yes and press [ENTER] to
activate the VPN tunnel. This field determines whether a VPN rule is applied before a
packet leaves the firewall.
Press [SPACE BAR] to choose either Yes or No. Choose Yes and press [ENTER] to
have the Prestige automatically re-initiate the SA after the SA lifetime times out, even
if there is no traffic. The remote IPSec router must also have keep alive enabled in
order for this feature to work.
Prestige 662HW Series User's Guide
Name= Taiwan
Nat Traversal= No
Content:
Content:
End/Subnet Mask= N/A
End= N/A
End/Subnet Mask= 255.255.0.0
End= N/A
438