Chapter 21 System Information & Diagnosis; System Status; Figure 21-1 Menu 24: System Maintenance - ZyXEL Communications ZYWALL 10W User Manual

This chapter covers SMT menus 24.1 to 24.4. DMZ applies to the ZyWALL 100. Wireless LAN
and dial-backup apply to the ZyWALL 100 and 10W (see Table 1-1 Model Specific Features).
This chapter covers the diagnostic tools that help you to maintain your ZyWALL. These tools include
updates on system status, port status and log and trace capabilities.
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown below.

21.1 System Status

The first selection, System Status, gives you information on the version of your system firmware and the
status and statistics of the ports, as shown in the next figure. System Status is a tool that can be used to
monitor your ZyWALL. Specifically, it gives you information on your system firmware version, number of
packets sent and number of packets received.
To get to the System Status:
System Information and Diagnosis
System Information & Diagnosis
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:

Figure 21-1 Menu 24: System Maintenance

ZyWALL 10~100 Series Internet Security Gateway
Chapter 21
21-1