Configuration File Screen - ZyXEL Communications 100-NH User Manual

Chapter 10 Maintenance
The following table describes the labels in this screen.
Table 37 Maintenance > Firmware Upgrade
LABEL
File Path
Browse...
Upload
Do not turn off the NWA while firmware upload is in progress!
Figure 61 Firmware Upload In Process
The NWA automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 62 Network Temporarily Disconnected
After the upload was finished, log in again and check your new firmware version in the Dashboard
screen.

10.8 Configuration File Screen

Use this screen to backup, restore and reset the configuration of your NWA.
114
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse... to find
it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
NWA1000 Series User's Guide