Table of Contents
Advertisement
Table 37 Configuration > WAN > Setup – Prestige – Routing Mode (continued)
LABEL
Nailed-Up Connection
Connect on Demand
Max Idle Timeout
Apply
Reset
8.4.3 WAN Backup - Prestige
The CON/AUX port on the Prestige can be used in reserve, as a traditional dial-up connection
should the WAN port connection fail. To set up the auxiliary port (AUX) for the Prestige for
use in the event that the regular WAN connection is dropped, first make sure you have set up
the switch and port connections.
8.4.3.1 Traffic Redirect
See
page 109
8.4.4 Configuring WAN Backup - Prestige
To change your Prestige's WAN backup settings, click WAN, then Backup. The screen
appears as shown.
Chapter 8 Configuration > WAN
DESCRIPTION
Select Nailed-Up Connection when you want your connection up all the
time. The Prestige will try to bring up the connection automatically if it is
disconnected.
Select Connect on Demand when you don't want the connection up all
the time and specify an idle time-out in the Max Idle Timeout field.
Specify an idle time-out in the Max Idle Timeout field when you select
Connect on Demand. The default setting is 0, which means the Internet
session will not timeout.
Click Apply to save the changes.
Click Reset to begin configuring this screen afresh.
for more information on traffic redirect.
Vantage CNM 2.0 User's Guide
122
Advertisement
Table of Contents
