Configure A Wan Ethernet Interface - ZyXEL Communications USG-100@USG-200 - V2.20 ED 2 Manual

Chapter 7 Tutorials
• This example does not use the ext-wlan interface (for Ethernet-connected APs)
so you remove port P6 from the ext-wlan interface and add it to the dmz
interface instead.
Figure 61 Ethernet Interface, Port Roles, and Zone Configuration Example

7.1.1 Configure a WAN Ethernet Interface

You need to assign the ZyWALL's wan1 interface a static IP address of 1.2.3.4.
118
ZyWALL USG 100/200 Series User's Guide