Secure Telnet Using Ssh Examples - ZyXEL Communications USG-100@USG-200 - V2.20 ED 2 Manual

Table 247 Configuration > System > SSH (continued)
LABEL
Move
#
Zone
Address
Action
Apply
Reset

50.8.5 Secure Telnet Using SSH Examples

This section shows two examples using a command interface and a graphical
interface SSH client program to remotely access the ZyWALL. The configuration
and connection steps are similar for most SSH client programs. Refer to your SSH
client program user's guide.
50.8.5.1 Example 1: Microsoft Windows
This section describes how to access the ZyWALL using the Secure Shell Client
program.
Launch the SSH client and specify the connection information (IP address, port
1
number) for the ZyWALL.
Configure the SSH client to accept connection using SSH version 1.
2
A window displays prompting you to store the host key in you computer. Click Yes
3
to continue.
Figure 571 SSH Example 1: Store Host Key
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
To change an entry's position in the numbered list, select the method
and click Move to display a field to type a number for where you want to
put it and press [ENTER] to move the rule to the number that you typed.
This the index number of the service control rule.
This is the zone on the ZyWALL the user is allowed or denied to access.
This is the object name of the IP address(es) with which the computer is
allowed or denied to access.
This displays whether the computer with the IP address specified above
can access the ZyWALL zone(s) configured in the Zone field (Accept) or
not (Deny).
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
Chapter 50 System
865