user access (logging into SSL VPN for example). See
more on service control.
The To-ZyWALL firewall rules apply to any kind of HTTP or HTTPS connection to the
ZyWALL. They do not distinguish between administrator management access and
user access. If you configure service control to allow management or user HTTP or
HTTPS access, make sure the firewall is not configured to block that access.
7.10.1 Allow HTTPS Administrator Access Only From the
LAN
This example configures service control to block administrator HTTPS access from
all zones except the LAN1.
Click Configuration > System > WWW.
1
In HTTPS Admin Service Control, click the Add icon.
2
Figure 121 Configuration > System > WWW
In the Zone field select LAN1 and click OK.
3
Figure 122 Configuration > System > WWW > Service Control Rule Edit
ZyWALL USG 100/200 Series User's Guide
Chapter 7 Tutorials
Chapter 50 on page 829
for
163