L2Tp Vpn Screen - ZyXEL Communications USG-100@USG-200 - V2.20 ED 2 Manual

Finding Out More
• See Section 6.5.17 on page 110
• See Chapter 8 on page 187
tunnel.

31.2 L2TP VPN Screen

Click Configuration > VPN > L2TP VPN to open the following screen. Use this
screen to configure the ZyWALL's L2TP VPN settings.
Note: Disconnect any existing L2TP VPN sessions before modifying L2TP VPN
settings. The remote users must make any needed matching configuration
changes and re-establish the sessions using the new settings.
Figure 408 Configuration > VPN > L2TP VPN
The following table describes the fields in this screen.
Table 143 Configuration > VPN > IPSec VPN > VPN Connection
LABEL
Create new
Object
Enable L2TP
Over IPSec
ZyWALL USG 100/200 Series User's Guide
for related information on these screens.
for an example of how to create a basic L2TP VPN
DESCRIPTION
Use to configure any new settings objects that you need to use in this
screen.
Use this field to turn the ZyWALL's L2TP VPN function on or off.
Chapter 31 L2TP VPN
561