Configuring Vantage Cnm - ZyXEL Communications USG-100@USG-200 - V2.20 ED 2 Manual

50.13.1 Configuring Vantage CNM

Vantage CNM is disabled on the device by default. Click Configuration > System
> Vantage CNM to configure your device's Vantage CNM settings.
Figure 579 Configuration > System > Vantage CNM
The following table describes the labels in this screen.
Table 253 Configuration > System > Vantage CNM
LABEL
Show Advance
Settings / Hide
Advance
Settings
Vantage CNM
Enable
Server IP
Address/FQDN
ZyWALL USG 100/200 Series User's Guide
DESCRIPTION
Click this button to display a greater or lesser number of configuration
fields.
Click Advanced to display more configuration fields or click Basic to
display fewer fields.
Select this check box to allow Vantage CNM to manage your ZyWALL.
Enter the IP address or fully qualified domain name of the Vantage
server.
If the Vantage CNM server is on a different subnet to the ZyWALL and is
behind a NAT router, enter the WAN IP address of the NAT router here
and configure the NAT router to forward UDP port 11864 traffic to the
Vantage CNM server.
If the Vantage CNM server is behind a firewall, you may have to create a
rule on the firewall to allow UDP port 11864 traffic through to the
Vantage CNM server (most (new) ZyXEL firewalls automatically allow
this).
Chapter 50 System
877