Turning On Your Prestige; Configuring Your Prestige For Internet Access; Connect To Your Prestige Using Telnet; Figure 2-5 P650Hw With Isdn - ZyXEL Communications P650HW User Manual

2.6

Turning On Your Prestige

At this point, you should have connected the ADSL line, the Ethernet port and the power port to the
appropriate devices or lines. Push in the power button (located on the back of your Prestige) to turn on your
Prestige.
2.7

Configuring Your Prestige For Internet Access

Configure your Prestige for Internet access using:
Web configurator (refer to the Read Me First).
SMT (System Management Terminal). Access the SMT via LAN or WAN using Telnet.

2.7.1 Connect to your Prestige Using Telnet

The following procedure details how to telnet into your Prestige.
Step 1. In Windows, click Start (usually in the bottom left corner), Run and then type "telnet
192.168.1.1" (the default IP address) and click OK.
Step 2. Enter "1234" in the Password field.
Step 3.
After entering the password you will see the main menu.
Hardware Installation and Initial Setup

Figure 2-5 P650HW with ISDN

Prestige 650HW ADSL Router
2-7