Console Port Speed; Log And Trace; Viewing Error Log; Figure 140 Menu 24.2.2 System Maintenance: Change Console Port Speed - ZyXEL Communications NWA-3100 User Manual

Chapter 21 System Information and Diagnosis
Table 74 Menu 24.2.1 System Maintenance: Information
FIELD
Country Code
LAN
Ethernet Address
IP Address
IP Mask
DHCP
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC
to cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.

21.2.2 Console Port Speed

You can set up different port speeds for the console port through Menu 24.2.2 – System
Maintenance – Console Port Speed. Your ZyXEL Device supports 9600 (default), 19200,
38400, 57600 and 115200 bps console port speeds. Press [SPACE BAR] and then [ENTER] to
select the desired speed in menu 24.2.2, as shown in the following figure.

Figure 140 Menu 24.2.2 System Maintenance: Change Console Port Speed

Menu 24.2.2 – System Maintenance – Change Console Port Speed
After you changed your ZyXEL Device's console port speed, you must also make the same
change to the console port speed parameter of your communication software.

21.3 Log and Trace

Your ZyXEL Device provides error logs and trace records that are stored locally.

21.3.1 Viewing Error Log

The first place you should look for clues when something goes wrong is the error log. Follow
the procedures to view the local error/trace log:
1 Type 24 in the main menu to display Menu 24 – System Maintenance.
2 From menu 24, type 3 to display Menu 24.3 – System Maintenance – Log and Trace.
202
DESCRIPTION
Refers to the country code of the firmware.
Refers to the Ethernet MAC (Media Access Control) of your ZyXEL Device.
This is the IP address of the ZyXEL Device in dotted decimal notation.
This shows the subnet mask of the ZyXEL Device.
This field shows the DHCP setting of the ZyXEL Device.
Console Port Speed: 9600
Press ENTER to Confirm or ESC to Cancel:
ZyXEL NWA-3100 User's Guide