Table of Contents
Advertisement
Chapter 23 System Maintenance and Information
Figure 160 Valid CI Commands
Copyright (c) 1994 - 2005 ZyXEL Communications Corp.
NWA-3100> ?
Valid commands are:
sys
config
bridge
radius
NWA-3100>
23.1.1 Command Syntax
• The command keywords are in courier new font.
• Enter the command keywords exactly as shown, do not abbreviate.
• The required fields in a command are enclosed in angle brackets <>.
• The optional fields in a command are enclosed in square brackets [].
• The |symbol means "or".
For example,
sys filter netbios config <type> <on|off>
means that you must specify the type of netbios filter and whether to turn it on or off.
23.1.2 Command Usage
A list of valid commands can be found by typing help or ? at the command prompt. Always
type the full command. Type exit to return to the SMT main menu when finished.
23.1.3 Brute-Force Password Guessing Protection
The following describes the commands for enabling, disabling and configuring the brute-force
password guessing protection mechanism for the password.
Table 79 Brute-Force Password Guessing Protection Commands
COMMAND
sys pwderrtm
sys pwderrtm 0
sys pwderrtm N
23.1.3.1 Configuring Brute-Force Password Guessing Protection: Example
sys pwderrtm 5
This command sets the password protection to block all access attempts for five minutes after
the third time an incorrect password is entered.
218
exit
device
wlan
ip
hdap
bm
8021x
wcfg
DESCRIPTION
This command displays the brute-force guessing password protection settings.
This command turns off the password's protection from brute-force guessing. The
brute-force password guessing protection is turned off by default.
This command sets the password protection to block all access attempts for N (a
number from 1 to 60) minutes after the third time an incorrect password is entered.
ether
ppp
certificates
rogueAP
ZyXEL NWA-3100 User's Guide
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
