Figure 100 New Remote Access Policy For Vlan Group; Figure 101 Specifying Windows-Group Condition - ZyXEL Communications NWA-3100 User Manual

Chapter 14 VLAN
• Right click Remote Access Policy and select New Remote Access Policy.
• Enter a Policy friendly name that describes the policy. Each Remote Access Policy will
be matched to one VLAN Group. An example may be, Allow - VLAN 10 Policy.
• Click Next.

Figure 100 New Remote Access Policy for VLAN Group

2 The Conditions window displays. Select Add to add a condition for this policy to act on.
3 In the Select Attribute screen, click Windows-Groups and the Add button.

Figure 101 Specifying Windows-Group Condition

4 The Select Groups window displays. Select a remote access policy and click the Add
button. The policy is added to the field below. Only one VLAN Group should be
associated with each policy.
5 Click OK and Next in the next few screens to accept the group value.
166
ZyXEL NWA-3100 User's Guide