System Information And Diagnosis; System Status; Figure 136 Menu 24 System Maintenance - ZyXEL Communications NWA-3100 User Manual

C
H A P T E R
This chapter covers the information and diagnostic tools in SMT menus 24.1 to 24.4.
These tools include updates on system status, port status, log and trace capabilities and
upgrades for the system software. This chapter describes how to use these tools in detail.
Type 24 in the main menu and press [ENTER] to open Menu 24 – System Maintenance, as
shown in the following figure.

Figure 136 Menu 24 System Maintenance

21.1 System Status

The first selection, System Status gives you information on the status and statistics of the
ports, as shown next. System Status is a tool that can be used to monitor your ZyXEL Device.
Specifically, it gives you information on your Ethernet and Wireless LAN status, and the
number of packets sent and received.
To get to System Status, type 24 to go to Menu 24 – System Maintenance. From this menu,
type 1. System Status. There are two commands in Menu 24.1 – System Maintenance –
Status. Entering 9 resets the counters; pressing [ESC] takes you back to the previous screen.
The following table describes the fields present in Menu 24.1 – System Maintenance –
Status which are read-only and meant for diagnostic purposes.
ZyXEL NWA-3100 User's Guide
System Information and
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
21
Diagnosis
199