Configuring Log Settings; Figure 90 Log Settings - ZyXEL Communications NWA-3100 User Manual

Chapter 13 Log Screens
Table 52 View Log
LABEL
Notes
Email Log Now
Refresh
Clear Log

13.2 Configuring Log Settings

To change your ZyXEL Device's log settings, click LOGS > Log Settings. The screen
appears as shown.
Use the Log Settings screen to configure to where and when the ZyXEL Device is to send the
logs and which logs and/or immediate alerts it is to send.
An alert is a type of log that warrants more serious attention. Some categories such as System
Errors consist of both logs and alerts. You may differentiate them by their color in the View
Log screen. Alerts are displayed in red and logs are displayed in black.

Figure 90 Log Settings

152
DESCRIPTION
This field displays additional information about the log entry.
Click Email Log Now to send the log screen to the e-mail address specified in
the Log Settings page.
Click Refresh to renew the log screen.
Click Clear Log to clear all the logs.
ZyXEL NWA-3100 User's Guide