Installation; Connecting Two Pcs To The Monitor; Connection Examples; Selecting Input Signal - Eizo FlexScan MX210 User Manual

2. Installation

. Installation

-1. Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the DVI-I connector on the back of the monitor.

Connection examples

(Ex.1) Digital
(Ex.2) Analog

Selecting input signal

Switch the input signal with
switched, the active signal type (Signal 1 or 2/ Analog or Digital) appears at the top right corner of the
screen for two seconds.
To set auto-switching of input signals [Input Signal]
The monitor recognizes the connector through which PC signals are input.
When either PC is turned off or enters the power-saving mode, the monitor automatically displays signals
of another PC.
Priority setting
Auto
Manual
[Input signal setting]
1. Choose <Others> from the Adjustment menu, and press
2. Choose <Input Signal> from the <Others> menu, and press
The <Input Signal> menu appears.
3. Select "Auto" or "Manual" with
The Input Priority setting is completed.
10
DIV-I
connector
(SIGNAL1)
PC 1
Signal Cable
(FD-C39 enclosed)
DVI
Signal Cable
D-Sub
(FD-C16 optional)
mini 15
pin
. Input signal switches each time
Input Signal Selection button
When either PC is turned off or enters the power-saving mode, the
monitor automatically displays signals of another PC.
The monitor does not detect the PC's signals automatically. Select an
active input signal with
or
D-sub mini
15-pin Connector
(SIGNAL2)
Signal Cable
(MD-C87 enclosed)
Signal Cable
(MD-C87 enclosed)
is pressed. When the signal is
Function
.
.
.
, and press .
PC 
D-Sub
mini 15 Analog
pin
D-Sub
mini 15 Analog
pin