Chapter 3 Connecting Cables; Connecting Two Pcs To The Monitor - Eizo FlexScan S1501-B User Manual

Chapter 3 Connecting Cables

3-1 Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the DVI-D and the D-Sub
mini 15 pin connector on the back of the monitor.
Connection examples
To PC 1
DVI-D connector
Signal cable (Digital)
FD-C39 (supplied)
Selecting input signal
Switch the input signal with
When the signal is switched, the active signal type (Analog or Digital) appears
at the top right corner of the screen for three seconds.
●
To set input signal selection [Input Signal]
Setting
Auto When PC displayed on the monitor is turned off or
enters the power-saving mode, the monitor automatically
displays signals of another PC.
Manual The monitor does not detect the PC's signals
automatically. Select an input signal with
[Procedure]
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Input Signal> from the <Others> menu, and press
The <Input Signal> menu appears.
(3) Select "Auto" or "Manual" with
The Input Priority setting is completed.
D-sub mini
DVI-D connector 15-pin Connector
Signal cable
MD-C87 (supplied)
Input Signal Selection button
. Input signal switches each time
Function
or , and press
To PC 2
D-sub mini 15-pin
Connector
is pressed.
• Power-saving function
.
.
.
.
Chapter 3 Connecting Cables
Note
When <Auto> is selected for <Input
Signal>, the monitor's power-saving
function works only when the two
PCs are in the power-saving mode.
21