5-2. Connecting More than Two PCs to the
Monitor
More than two PCs can be connected to the monitor through the DVI-I and the DisplayPort
connector on the back of the monitor.
●
To switch the input signal
The input signal switches each time
When the signal is switched, the active input port name appears at the top right corner of the
screen.
●
To set input signal selection [Input Signal]
The monitor recognizes the connector through which PC signals are input.
Priority setting
Auto
Manual
Procedure
1.
Choose <Tools> from the Adjustment menu, and press
2.
Choose <Input Signal> from the <Tools> menu, and press
The <Input Signal> menu appears.
3.
Select "Auto" or "Manual" with
4.
Press
Attention
•
When "Auto" is selected for <Input Signal>, the monitor's power-saving function works only when more
than two PCs are in the power-saving mode.
is pressed.
When a PC is turned off or enters the powersaving mode, the monitor
automatically displays another signal.
The monitor detects only the PC's signals currently displaying
automatically. Select an active input signal with
DisplayPort
Connector DVI-I Connectors
to exit the adjustment.
Function
.
or
.
Chapter 5 Reference
.
.