Chapter 3 Connecting Cables; Connecting Two Pcs To The Monitor - Eizo FlexScan S1961 User Manual

Chapter 3 Connecting Cables

3-1 Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the DVI-D and the D-Sub
mini 15 pin connector on the back of the monitor.
Connection examples
To PC 1
DVI-D connector
Signal cable
(Digital) FD-C39
Selecting input signal
Switch the input signal with
When the signal is switched, the active signal type (Analog or Digital) appears
at the top right corner of the screen for two seconds.
D-sub mini
DVI-D connector 15-pin Connector
Signal cable
MD-C87
Input Signal Selection button
. Input signal switches each time
To PC 2
D-sub mini 15-pin
Connector
• The monitor recognizes the connector
is pressed.
Chapter 3 Connecting Cables
NOTE
through which PC signals are input.
When either PC is turned off or enters
the power-saving mode, the monitor
automatically displays signals of
another PC.
19