CLI – This example shows the default global setting for 802.1X.
Console#show dot1x
Global 802.1X Parameters
system-auth-control: Disabled
802.1X Port Summary
Port Name Status
1/1
disabled
1/2
disabled
. .
.
802.1X Port Details
802.1X is disabled on port 1/1
. .
.
802.1X is disabled on port 1/28
Console#
Configuring 802.1X Global Settings
The 802.1X protocol provides port authentication. The 802.1X protocol
must be enabled globally for the switch system before port settings are
active.
Command Attributes
•
802.1X System Authentication Control – Sets the global setting for
802.1X. (Default: Disabled)
Web – Select Security, 802.1X, Configuration. Enable dot1x globally for
the switch and click Apply.
Figure 3-40. 802.1X Global Configuration
CLI – This enables 802.1X globally for the switch
Console(config)#dot1x system-auth-control
Console(config)#
Operation Mode
Single-Host
Single-Host
U
A
SER
UTHENTICATION
Mode
ForceAuthorized n/a
ForceAuthorized n/a
4-110
Authorized
4-105
3-91