Using The Smartdevicemonitor Port; Installing Desktopbinder-Smartdevicemonitor For Client - Ricoh AficioSP C410DN Software Manual

Using the SmartDeviceMonitor Port

Installing DeskTopBinder-SmartDeviceMonitor for Client

Important
❒ To install SmartDeviceMonitor for Client under Windows 2000/XP Profes-
sional, Windows Server 2003, and Windows NT 4.0, you must have an ac-
count that has Manage Printers permission. Log on as an Administrator.
❒ Install SmartDeviceMonitor for Client before installing the printer driver
when using the SmartDeviceMonitor for Client port.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [OK].
The default interface language is English.
D
Click [DeskTopBinder - SmartDeviceMonitor for Client].
E
Select an interface language, and then click [Next >].
The default interface language is English.
F
The message to quit all other applications appears. Quit all applications,
and then click [Next >].
G
Click [Yes]
H
The DeskTopBinder Lite Setup dialog appears, and then click [Next >].
I
The software license agreement appears in the [License Agreement] dialog
box. After reading through its contents, click [Yes].
J
Click [Full install] or [Custom Install].
[Full install] installs all required applications: DeskTopBinder Lite and Smart-
DeviceMonitor for Client.
[Custom Install] installs selected applications.
K
Follow the instructions on the display and click [Next>] to proceed next step.
L
After the installation is completed, select one of the options to restart the
computer either now or later, and click [Complete].
Restart the computer to complete installation.
Note
❒ Auto Run may not work with certain operating system settings. If this hap-
pens, launch "Setup.exe" on the CD-ROM root directory.
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete.
Using the SmartDeviceMonitor Port
1
7